fe-0-6pen-sanko-vietnam.png

Fe-0.6Pen, Sanko Vietnam

Xuất sứ: Japan

Nhà cung cấp: Pitesco.,ltd

Hãng sản xuất: Sanko-denshi

Liên hệ tư vấn

Mr. Hà

ha@pitesco.com

0392.407.993

live:ha_1652

ELECTRO-MAGNETIC / 
EDDY CURRENT COATING THICKNESS METERS
Exclusive probes for SWT series 
Fe-2.5 Fe-0.6Pen Fe-10
NFe-2.0 NFe-8
● Separate-interchangeable probes available with a main unit.
● Selections of probe for ferrous (electro-magnetic) or non-ferrous ( eddy current) substrate depending on a measuring object.
● Capability of selections probe like high-stable probe to measure minute piece objects or alike depending on applications and a measurement range.
Specifications of SWT (Fe probes)
　Models Fe－2.5※1/2.5L Fe-2.5LwA Fe-0.6Pen
　Methods Magnetic inducing type
　Ranges 0～2.50mm 0～600μm
　Display resolutions 1μm：0～999μm
switching to
0.1μm：0～400μm
0.5μm：400～500μm
0.01mm：1.00～2.50mm		 1μm：0～600μm
switching to
0.1μm：0～400μm
0.5μm：401～500μm
　Accuracies
　(perpendicularly 
　testing on 
　flat face)		 0～100μm：±1μm
or ±2% the reading value
101μm～2.50mm：±2%
0～100μｍ：±１μｍ　or ±2％ the reading value
101μm～600μm: 
±2% the reading value
　Probes One point contact constant pressure type, 
V cut
2.5：φ13×48mm
2.5L：18x23x67mm		 One point contact constant pressure type,
Measuring part：About 20x57mm
Total Length： about 550～1,550mm (flexible)		 One point contact constant pressure type, V cut
φ5.6x94mm
V type probe adaptors※2 
/Non		 Non
　Accessories Standard thickness, 
Zero plate for testing (Fe)		 Standard thickness, 
Zero plate for testing (Fe)
Carrying case		 Standard thickness, 
Zero plate for testing (Fe)
　Measuring objects Coating, lining, thermal spray films, plating (except electrolyte nickel plating) etc. on magnetic metal substrate like iron, steel. Coating, lining, plating on high/hard-to-reach/remote place on magnetic metal substrate like iron, steel. Coating, lining, plating on a narrow/small place and part substrate like iron, steel.
※1．Probes are heat-resistant （about 200℃）. （Ｆｅ-2..5）
※2．V type probe adaptors　(３ kinds: lessΦ5, Φ5～10, Φ10～20） can be used with Fe-2.5.
　Models Fe-10 Fe-20
　Methods Magnetic inducing type
　Ranges 0～10mm 0～20mm
　Display resolutions 1μm：0～999μm
0.01mm：1～10mm		 1μm：0～999μm
0.01mm：1～5mm
0.1mm：5～20mm
　Accuracies
　(perpendicularly
　testing on flat
　face)		 0～3mm：±(5μm + 3％ the read value)
Over or 3.01mm：±3％ the read value
　Probes One point contact constant pressure type, V cut
φ18x47mm		 One point contact constant pressure type, V cut
φ35x59mm
　Accessories Standard thickness,
Zero plate for testing （Fe）
　Measuring 　objects Relatively thicker objects Thick objects
Probe must be ordered separately.
Specifications of SWT (NFe probes)
　Models NFe-2.0※１/2.0L NFe-0.6 NFe-8
　Methods Eddy current type
　Ranges 0～2.00mm 0～600μm 0～8mm
　Display 
　resolutions		 1μm：0～999μm
switching to
0.1μm：0～400μm
0.5μm：400～500μm
0.01mm：1.00～2.00mm		 1μm：0～600μm
switching to
0.1μm：0～400μm
0.5μm：400～500μm		 1μm：0～999μm
0.01mm：1～8mm
　Accuracies
　(perpendicularly 
　on flat face)		 0～100μm：±1μm
or ±2% the read value
101μm～2.00mm：±2%		 0～100μm：±1μm
or ±2% the read value
101μm～600μm：±2%		 0～3mm：±(5μｍ + ±3％ the read value)
Over or 3.01mm：±3％ the read value
　Probes One point contact constant pressure type, V cut
2.0：φ13×47mm
2.0L：18x23x67mm		 One point contact constant pressure type,
φ11×48mm		 One point contact constant pressure type, V cut
φ35×61mm
V type probe adaptor※2/Non Non
　Accessories Standard thickness, Zero plate for testing (NFe)
　Measuring 
　objects		 Insulated films on non-Magnetic metal substrates like aluminum, cupper
Relatively general use objects like aluminum, cupper for high stability for narrow bar , tube, minute pieces Relatively thick objects
Probe must be ordered separately.
※1．Probes are heat-resistant （about 200℃）. （ＮＦｅ-2.0）
※2．V type probe adaptors　(３ kinds：lessΦ5, Φ5～10, Φ10～20） can be used with NFe-2.0.