The Vortex Aggregate Diverter is designed to meet the demanding applications with handling material such as sand, gravel, whole grains, and coal. The optional inlets, chute liners, and bucket liners extend the life of this valve when handling abrasive materials. The diverter’s access panel allows for quicker entry to the interior of the diverter for inspecting and cleaning the valve. The heavy-duty abrasion resistant bucket is also removable through this access panel for service.
Key Industries Served: Agriculture, Chemicals, Minerals, Mining, Petrochemicals, Plastics, Textiles
Rated for ATEX Zone 0/20 internal and Zone 1/21 external
- Optional replaceable abrasion resistant liners
- Heavy-duty bucket that addressees material impact and wear
- Removable access door for internal inspection, cleaning, and maintenance
- Bucket seals reduce interior dusting
- Serviceable while in-line
- Gravity flow
- Handles nonabrasive to abrasive materials like Coal, Gravel, Sand, and Whole Grains
- Carbon steel material of construction
- Optional interior dead-pockets allow material to impact on itself reducing wear
- Standard sizes: 6″ – 24″ | 150mm – 600mm
SPECIFICATIONS | |||
---|---|---|---|
MODIFICATIONS*more modifications available based on application45/30
The angle the outlets are offset (45 or 30) degrees. HT4Modifications are made allowing 400 F (204 C) continuous to 450 F (232 C) intermittent service. DPCarbon steel special service inlet with built-in dead pocket deflector. PLReplaceable abrasion resistant polymer liner on bucket legs. HLAR400 carbon steel honeycomb liner on bucket legs. HBAR 400 carbon steel honeycomb liner on bucket. RTRound transitions with SVC bolt hole pattern are mounted to the inlet and two outlets of the valve. RTPRound transitions with ANSI (or DIN if a Metric Valve) bolt hole pattern are mounted to the inlet and two outlets of the valve. |
|||
Size/Bore Options | 6” to 24” diameter round or square | ||
Media | Aggregates | ||
Connection Options | SVC Standard Flange, ANSI, DIN, JIS, or Custom Flanges | ||
Media Temperature | Up to 250°F (121°C) continuous to 300°F (148°C) intermittent service, modifications allow up to 400°F (204°C) continuous to 450°F (232°C) intermittent service | ||
Media Pressure/Vacuum | 0 psig, Gravity Flow Only | ||
Valve Construction Options | Carbon Steel | ||
Material Contact Options | Carbon Steel | ||
Seal/Seat Material | Polyurethane, EPDM, and/or Silicone Rubber | ||
Drive/Actuation | Double Acting Air Cylinder with Solenoid Operated Air Control Valve, Electric Actuator, or Hand Lever | ||
Position Confirmation | Magnetic Reed, Proximity, or Mechanical Limit Switches | ||
Compliance Approvals | CE, ATEX | ||
Industry Use | Agriculture, Chemicals, Minerals, Mining, Petrochemicals, Plastics, Textiles |