single-acting-cylinders-aluminium-cfa-series-xy-lanh-don-cfa-series.png

Single acting cylinders aluminium CFA-series

REHOBOT CFA-series cylinders are all made of high-tensile aluminum providing an excellent service life in low cycle applications. They have an outstanding power to weight ratio – weighing approximately 50% less than steel cylinders. The cylinder tube and piston are hard anodised for extended protection against wear and corrosion. CFA cylinders are delivered with a top lip and a protective bottom plate of steel, all to warrant proper function even if the base and lifting points are rough.

  • 24-95 ton capacity.
  • 100-200 mm stroke length.
  • Anodised cylinder and piston for increased wear and corrosion protection.

Couplings
All REHOBOT cylinders can be provided with either a push-to-connect (male coupling half, AQU8) or a screw-to-connect (female coupling half, AQI24). Please contact us for further information.

Note! The REHOBOT range of aluminium cylinders are designed to be used in intermittent and in low-cycle applications such as normal maintenance and lifting operations. These aluminium cylinders are designed to provide a lifetime of at least 5,000 cycles and therefore should NOT be used in high-cycle operations like production lines etc. Use of these cylinders beyond their rated life can lead to sudden failure without warning and could cause property damage, injury, or death.

 

Product list

 

Name

Item code

Working press. MPa

Capacity kN (t)

Stroke mm

Stroke volume cm³

Diameter mm

Height mm

Weight kg

CFA250-100

48978

70

232 (24)

100

332

100

212

4.4

CFA250-200

48980

70

232 (24)

200

664

100

312

5.9

CFA500-100

47153

70

496 (51)

100

709

140

223

9.2

CFA500-200

47160

70

496 (51)

200

1418

140

323

12.7

CFA750-100

47185

70

727 (74)

100

1039

170

235.5

14

CFA750-200

47186

70

727 (74)

200

2078

170

335.5

18.3

CFA1000-100

47163

70

929 (95)

100

1327

190

243

18.4

CFA1000-200

47171

70

929 (95)

200

2655

190

343

24.7