Key Industries Served: Agriculture, Chemicals, Foods, Minerals, Petrochemicals, Plastics, Textiles
- Pneumatic (Dense & Dilute Phase) or Gravity Flow Conveying
- Handles non abrasive to moderately abrasive powders, granules, and pellets
- Mechanically self cleans on opening stroke
- No pinch points or exposed moving parts for safe operation
- Wear compensating hard polymer seals
- Unobstructed opening
- Food friendly options available
- Horizontal or vertical valve orientation
- Open / closed or volume metering of material
- Seals protected from material flow stream
- Serviceable while in-line
- Material construction options available
- Standard sizes: 2″ – 16″ | 50mm – 400mm |
| SPECIFICATIONS |
|
|
| MODIFICATIONS |
|
| *more modifications available based on application |
| G |
CS Body/S4 or S6 Contact: Offered in 2” thru 14”. All actuator options are available. Traditional and over-sized cylinder option are available up to 5” size. The valve body is carbon steel and bore matches standard 11 Ga. (0.120 Wall) tubing. 3/8” thick Carbon Steel out flanges and 304SS sleeve inserts. Bonnet access covers, Power Plate, and End Plate are Carbon Steel construction. All fasteners are zinc plated and there are NO acorn nuts. (Valve designed for indoor service).
|
| H |
AL Body & Outflange/AL Contact: Bore matches standard 11 Ga. (0.120 Wall) tubing. Out Flanges and sleeve insert is 6061-T6 Aluminum Construction. All fasteners are 18-8 SS.
|
| F |
AL Body & Outflange/S4 or S6 Contact: Bore matches standard 11 Ga. (0.120 Wall) tubing. 3/8” thick Out Flanges and sleeve inserts are 304SS construction. All fasteners are 18-8 SS. *Must choose material contact.
|
| J |
SS Body & Outflange/S4 or S6 Contact: Bore matches standard 11 Ga. (0.120 Wall) tubing. 3/8” thick Out Flanges and sleeve inserts are 304SS construction. All fasteners are 18-8 SS. *Must choose material contact.
|
| HT3 |
250°F-300°F (121°C-149°C) HIGH TEMPERATURE SERVICE: Replace standard natural rubber Load Seal and Void Filler on back of Pressure Plate with silicone rubber only (remove void filler).
|
| HT4 |
400°F-450°F (204°C-232°C) HIGH TEMPERATURE SERVICE: Replace standard Pressure Plate, Shim Spacer and Load Seals with 25% Glass-filled Teflon Pressure Plate, Shim Spacer and Silicone Load Seals (Void Filler is removed). Replace standard Air Cylinder with Viton seal Air Cylinder. Replace standard SBR Flange Gaskets with 3/16” silicone sponge Flange Gaskets. This option is NOT food grade.
|
| WS1 |
WATER WASHDOWN / STICKY MATERIALS: Replace Nylon6/6 Pressure Plates and Spacer Shim with PET Pressure Plates and Delrin or Acetron GP Spacer Shim. Replace standard Slide Blade with electropolished Slide Blade.
|
|
| Size/Bore Options |
2” to 16” Diameters |
| Media |
Powder, Pellets, Granulars |
| Connection Options |
SVC Standard Stud Pattern, ANSI, DIN, JIS, and Custom Flanges available |
| Media Temperature |
180°F (82°C) for standard gate with modifications allow up to 400°F (204°C) |
| Media Pressure/Vacuum |
Up to 15 psig, 0.1 MPa, 1 barg (depending on gate size) |
| Valve Construction Options |
304 or 316L Stainless Steel, Aluminum, and/or Carbon Steel |
| Material Contact Options |
304 or 316L Stainless Steel |
| Seal/Seat Material |
Nylon, PET, UHMW, Glass Filled Teflon, Natural Rubber, and/or Silicone Rubber |
| Drive/Acuation |
Double Acting Air Cylinder and Solenoid Operated Air Control Valve, Electric Actuator, Chain Wheel, Hydraulic |
| Position Confirmation |
Magnetic Reed, Proximity, or Mechanical Limit Switches |
| Compliance Approvals |
CE, ATEX, FDA |
| Industry Use |
Agriculture, Chemicals, Foods, Minerals, Petrochemicals, Plastics, Textiles |
Mr. Nghia
nghia.pitesco
