Mr. Nghia
nghia.pitescoSeal Tite Diverter
Rated for ATEX Zone 0/20 internal and Zone 1/21 external
| Size/Bore Options | 4” to 30″ Diameter Square or Rectangular with Round Transition Options |
| Media | Powder, Pellets, Granulars |
| Connection Options | SVC Standard Flange, ANSI, DIN, JIS, or Custom Flanges |
| Media Temperature | Up to 180°F (82°C) continuous to 250°F (121°C) intermittent service, modifications allow up to 400°F (204°C) continuous to 450°F (232°C) intermittent service |
| Media Pressure/Vacuum | 0 barg, Gravity Flow Only |
| Valve Construction Options | 304 or 316L Stainless Steel, and Carbon Steel |
| Material Contact Options | 304 or 316L Stainless Steel, and Carbon Steel |
| Seal/Seat Material | Nylon, PET, UHMW, Glass Filled Teflon, Natural Rubber, Kryptane, and/or Silicone Rubber |
| Drive/Actuation | Double Acting Air Cylinder with Solenoid Operated Air Control Valve, Electric Actuator, or Hand Lever |
| Position Confirmation | Magnetic Reed, Proximity, or Mechanical Limit Switches |
| Compliance Approvals | CE, ATEX, FDA |
| Industry Use | Agriculture, Chemicals, Foods, Minerals, Petrochemicals, Plastics, Textiles |
edge of blade protected from material flow
- Wear compensating shaft seal prevents leakage
- Removable access doors for internal inspection, cleaning and maintenance
- Positive seal of dust and fine powders
- Available in 2 and 3-way configurations
- Internal access without tools
- Food friendly options available
- Gravity flow
- Handles nonabrasive to abrasive powders, granular or pellets
- Carbon or stainless steel material of construction
- Material construction options available
- Standard sizes: 4″ – 30″ | 100mm – 750mm | Contact us for custom sizes
