Low-Flow Magnetic Inductive Flow meters for water-like liquids
Xuất sứ: Holland
Nhà cung cấp: PITESCO VIET NAM
Hãng sản xuất: Bronkhorst
Mr. TríMAG-VIEW MVM-250-PA,
MAG-VIEW MVM-250-PN
Low-Flow Magnetic Inductive Flow meters for water-like liquids
- Compact, weatherproof (IP65) design
- No moving parts (no mechanical wear)
- Interference free operation
- Independence to inlet/outlet pipework
- Fast response
- Free pipe cross section: low ΔP, insensitive to contamination
Electromagnetic flow meters for low flow rates of water and aqueous solutions
MAG-VIEW instruments are electromagnetic inductive flow meters for electrically conductive liquids with a minimum conductivity of 50 μS/cm. The compact, weatherproof (IP65) flow meters do not contain any moving parts, cause virtually no pressure loss and can be mounted in any position, requiring no straight inlet or outlet runs.
MAG-VIEW flow meter model MVM-250-PN has a nominal diameter of DN20 for flow rates of 5...250 l/min, suited for operating pressures up to 16 bar(g). The pulse output of the instrument is proportional to the flow.
Technical specifications
|
Performance |
|
|---|---|
|
Accuracy |
±1,5% Rd, ±0,3% FS |
|
Turndown |
1:50 |
|
Signal output starting from |
~ 4 l/min |
|
Response time |
< 500 ms |
|
Flow indication |
green LED, flow proportional flashing |
|
Media |
Water and other conductive liquids |
|
Reproducibility |
1% FS |
|
Medium temperature |
5...90°C |
|
Mounting |
Any position, attitude insensitive |
|
Mechanical parts |
|
|---|---|
|
Material (wetted parts) |
Electrodes: Stainless Steel 1.4571 |
|
Housing |
Aluminium pressure diecasted |
|
Ingress protection (housing) |
IP65 |
|
Diameter |
DN20 |
|
Process connections (welded) |
1" BSP male thread |
|
Nominal pressure |
PN16 |
|
Electrical properties |
|
|---|---|
|
Power supply |
24 VDC ±10 % |
|
Power consumption |
≤ 150 mA |
|
Frequency output Pulse rate / K-factor |
100 pulses/l |
|
Electrical connection |
5-pin-plug M12x1 |
