digital-room-temp-humi-transmitter-gro-series.png

DIGITAL ROOM TEMP. & HUMI. TRANSMITTER_ GRO-Series

Hãng sản xuất: Ginice

Liên hệ tư vấn

Ms. Trinh

trinh@pitesco.com

0914.738.179

trinh trinh

This unit can be used as control transmitter by sensing relative humidity and temperature of room  of ventilation, air-handling units. Also can be used  interface detect transmitter with sensing value display or auto control system of building. The standard Temp. & Humi. Output of LCD transmitters is 4~20mA. The temperature output signal can be active.

CATALOGUE
 

 
▪ POWER                                : 15~30VDC
▪ OUPUT SIGNAL : ▪ CURRENT : 4~20mA
                           ▪ VOLTAGE  : 1~5VDC
                           ▪ RS            : RS-232, RS-422, RS-485
                           ▪ TEMP.      : Pt      (Pt100Ω,Pt100Ω classA)
                                               NTC   (NTC3KΩ, NTC5KΩ, NTC10KΩ - AN,CP)
▪ SENSING ELEMENT              : CMOS-Bandgap(SMD) Digital sensor (Temp.)
                                               Capacitive polymer cell (Humi.)
▪ SENSING RANGE                  : Please see ordering guide 
▪ WIRING                                : 3,4,5,6-Wire
▪ ACCURACY                          : at 25℃, Within±0.2℃
                                               at 10~90%RH, Within±2%RH
▪ HYSTERESIS                        : 0.1℃ Max. /  1%RH Max.
▪ SENSING TIME                     : 4~20Sec (Response time)
▪ AMBIENT TEMP.                   : -20~60℃
▪ AMBIENT HUMI.                    : Below 95%RH
▪ PROTECTION CLASS             : IP30 (EN60529)
▪ DIMENSION                          : 80[W] × 105[H] × 31[D]
▪ WEIGHT (With bracket)           : 0.20Kg