DC 420 Vietnam, DC 420 PCE Instrumet Vietnam, Sewage Leak Detector DC 420 PCE Instrumet Vietnam
Nhà cung cấp: Pitesco
Hãng sản xuất: PCE Instruments
Mr. Hà
live:ha_1652DC 420 Vietnam, DC 420 PCE Instrumet Vietnam, Sewage Leak Detector DC 420 PCE Instrumet Vietnam, đại lý PCE Instrumet Vietnam
The sewage leak detector DC 420 is a precise multifunctional device for registration of any kind of differential pressure, absolute pressure, humidity, temperature. The extremely large dynamic range of the sewage leak detector allows highly sensitive measurements of smallest pressures in Pascal-ranges for gas tension- and compression measurements and also the leak detection of sewage-pipes according to EN 1610. A maximum measuring range of up to 2 Bar and a bursting pressure of 3 Bar guarantees enough safety even for higher pressure ranges. During all measurement the operator is navigated through the process by instructions written on the display. Thus the sewage leak detector can be also used for (room-) climate measurements. Therefore in addition to the pressure sensor there is also an integrated temperature sensor as standard and optionally a humidity sensor. Furthermore the application range of the sewage leak detector can be extended by an external temperature sensor. All values can be logged for up to several years depending on the chosen sampling rate and be transferred via an integrated USB interface to a computer. If one or more measurements have been performed, they can be assigned to the relevant customer via the menu navigation. Measuring protocols can be printed, even with the company's label, right away on an optionally purchasable thermal printer. There can also be a continuous data transfer switched-on via the setup-menu, so that during the measuring procedures all four values (pressure, temperature internally and externally, relative humidity) can be transferred to a computer with the relevant channel numbers. The extremely low power consumption of the sewage leak detector is caused by a brand new processor technology, where the power consumption is adjusted to the measuring task dynamically. Even within the operation mode with maximum power consumption (6 mA) a continuous operation time of more than 300 hours can be reached due to four mignon cells, type AA. Within the logger operation mode the operation time can be even enhanced to several years (4680 measurements) by alternating the interval to 4 hours between the measurements, without any battery change or using up of the storage capacity. The sewage leak detector can be applied for gasiform mediums (air or inert gas) as well as for liquids, such as water or heat oil. Therefore it should be considered that remains of the liquids within the pressure ports might falsify the measuring results. Therefore the sewage leak detector should not be used for measurements of gasses any more after it has been already used for liquids.
- Self-explanatory menu navigation
- Intelligent valve block
- With USB interface
- Intelligent valve block
- With USB interface
- Data transfer to computer via USB
- Select customer from data memory
- For Sewerages
- Select customer from data memory
- For Sewerages
