damper-actuator-on-off-damper-actuator-gda-20ad.png

DAMPER ACTUATOR_ON / OFF DAMPER ACTUATOR_GDA-20AD

Xuất sứ: korea

Hãng sản xuất: Ginice

Liên hệ tư vấn

Ms. Trinh

trinh@pitesco.com

0914.738.179

trinh trinh

ON / OFF DAMPER ACTUATOR
 
 
 
 
 
Model
 
PDF Download
 
 
 
 
 
 
 
 

 

GDA-20A is motor operated ON / OFF damper actuator to open and close Damper which can be used for HVAC air handling units.

 

Used for operating Damper for ventilation and Air handling facilities.
Nominal torque is 20Nm and can be covered damper surface area for 4㎡.
Used for ON / OFF damper control.
Used for air damper, ventilating gas damper, etc.
 
 Select operating direction ( CW or CCW ) by changing the connection of wiring
 Actuator will move within 0°”or“90° in case of normal input supply power 
 When the power is OFF at AC24V or AC220V, Actuator will stop moving at the current position
 
Supply Voltage    AC 24V ±10%, or (AC220V)
  Frequency   50 / 60 ㎐
 Power Consumption   5.5VA ( On Operation )
 Control Signal   ON / OFF Switch
 Torque   200 Kg-㎝(20 Nm)
 Rotation Range   0 ~ 90°
  Mechanical Rotation Range  95°±2° ( mechanical limit at 95°)
  Direction of Rotation    Forward/Reverse direction ( changing wire connection)
 Operating Tie   Apprx. 110 sec.
 Ambient temperature   -30 ~ +50℃, below 95%RH
 Connecting Cable   0.5sq.mm ~ 1.5mm
 Noise Degree   45 dB
 Protection Housing Class   IP 42
 Weight   1.67 Kg
 Applicable Damper Shaft   Φ10~Φ20 ( round ), □10~□16 ( square )
 

 Mounting Bracket : To mount actuator on damper axis directly, it must be used bracket, and fixing pin of mounting bracket should be correctly fixed into the groove of Actuator.
 Mounting Location : Select easy location for setting dial of front side of Actuator and cable connection.
 Manual Control : According to mounting procedures, and press manual control button first and adjust shaft adaptor and location indicator. ( in case of manual control, power should not be connected )

GDA-20A is motor operated ON / OFF damper actuator to open and close damper which can be used for HVAC air handling units.

 

 
Model(optional) GDA-20A
Supply Voltage  AC 220V ±10%
Frequency 50 / 60 ㎐
Power Consumption 동작시 / 5VA(4.5W), 평상시 / 2.9W
Control Signal ON / OFF Switch
Torque 20 Nm
Rotation Range 0 ~ 90°
Mechanical Rotation Range 95°±2° ( mechanical limit at 95°)
Direction of Rotation Forward/Reverse direction ( changing wire connection)
Operating Tie Approx. 110 sec.
Ambient temperature :-30 ~ +50℃, below 95%RH
Connecting Cable 0.5sq.mm ~ 1.5mm
Noise Degree 35 dB
Protection Housing Class IP 54 (EN60529)
Weight 1.4 Kg
Applicable Damper Shaft Φ10~Φ20 ( round ),  □10~□16 ( square )