charge-amplifier-hol350-holthausen-elektronik-vietnam.png

charge amplifier (hol350) Holthausen elektronik Vietnam

Hãng sản xuất: Holthausen-elektronik

Liên hệ tư vấn

Mr. Trí

tri@pitesco.com

0912 300 549

charge amplifier (hol350) Holthausen elektronik Vietnam, charge amplifier (hol350) Holthausen elektronik, charge amplifier (hol350) Vietnam, charge amplifier (hol350)

DESCRIPTION: 

The charge amplifier hol350 enables the connection of vibration acceleration sensors, which have no integrated electronic charge amplifiers. Using ICP® output subsequent evaluation circuits are connected.

The device offers with the high-pass and the antialising-filter the possibility for a direct connection to an AD-card. The sensor input and the ICP® output are galvanically seperated.Through the robust plastic terminal cabinet for the snap rail systems and the easy installation and handling of the amplifier, a high reliability is guranteed.

APPLICATION FIELDS: 

At all technical applications in which vibrations occur, the charge amplifier(hol350) is a valuable support. Here some examples:

 

  • Amplification (processing) of small signals
  • Adaptation of sensors to evaluation circuits with ICP® input       
  • measurement equipment (e.g. oscilloscope) computer interfaces or -cards
TECHNICAL DATA:

operating voltage:

24V DC +-10%

current consumption:

max. 30mA

temperature range:

0°C to 70°C

degree of protection:

IP 20

case dimensions:

25 x 79,2 x 74mm (B x H x T), without clamps and control panel

weight:

ca. 90g

sensitivity:

1mV/pC, +-2,5% - 80Hz

frequency range:

1Hz to 100kHz +-0,5dB

max. input signal:

5nC

common mode rejection:

> 30dB (1Hz to 50kHz)

output:

ICP®- sink

modulation-voltage:

18 to 28V

output impedance:

<200 Ohm

constant current supply:

2 to 20mA

 
  • Deutsch
  • Русский