Cảm biến khoảng cánh DME5000-112

Long range distance sensors
DME5000

• Performance

  Measuring range	0.15 m ... 70 m, on reflective tape "Diamond Grade" 1)
  Target	Reflector
  Resolution	0.05 mm ... 5 mm
  Repeatability	0.5 mm 1) 2)
  Accuracy	± 2 mm
  Response time	6 ms
  Output time	2 ms
  Light source	Laser, red 3)
  Laser class	2, complies with 21 CFR 1040.10 and 1040.11 except for the tolerance according to “Laser Notice No. 50” from June 24, 2007 (IEC 60825-1:2014, EN 60825-1:2014)
  Typ. light spot size (distance)	130 mm (at 70 m) 270 mm (at 150 m) 360 mm (at 220 m)
  Max. movement speed	10 m/s

  • ¹⁾ On reflective tape "Diamond Grade".
  • ²⁾ Statistical error 1 σ, environmental conditions constant, min. warm-up time 10 min.
  • ³⁾ Average service life of 50,000 h at T_A = +25 °C.

• Interfaces

  PROFIBUS DP	✔
  Switching output	Push-pull: PNP/NPN (100 mA) 1)
  Multifunctional input (MF)	1 x MF 2) 3)

  • ¹⁾ HIGH = > V_S - 3 V / LOW = < 2 V.
  • ²⁾ HIGH = > 12 V / LOW = < 3 V.
  • ³⁾ Not reverse-polarity protected.

• Mechanics/electronics

  Supply voltage Vs	DC 18 V ... 30 V, limit values
  Ripple	< 5 Vpp 1)
  Initialization time	1.5 s 2)
  Connection type	Male connector, 2 x M12, 5-pin, B-coded, 1 x M16, 8-pin, B-coded
  Indication	Display
  Weight	Approx. 1,650 g
  Output current IA	≤ 100 mA 3)
  Current consumption	At 24 V DC < 250 mA
  Enclosure rating	IP65
  Protection class	II 4)

  • ¹⁾ May not fall short of or exceed V_S tolerances.
  • ²⁾ After loss of reflector < 1 s at max. speed V_max < 1 m/s.
  • ³⁾ Max. 100 nF/20 mH.
  • ⁴⁾ Reference voltage DC 32 V.