aquascat-s-sigrist-vietnam.png

AQUASCAT S VIETNAMAQUASCAT S SIGRISTAQUASCAT S SIGRIST VIETNAMAQUASCAT S

In-line turbidity measurement for the water treatment

The AquaScat measures the turbidity of potable water according to IEC 27027, with the measurement carried out directly in the water. This reduces maintenance work to a minimum. The calibration is done with a checking unit that is installed when needed. Various customer wishes can be catered for with the different options for data visualization and connection to a PLC/SCADA. Thanks to the different process integration options, a solution can be found for virtually any requirement.

 

SPECIFICATION

Measuring principle

90° Scattered light according to ISO 7027/EN27027

Nominal range

0 .. 4’000 FNU

Scale ranges

8, freely programmable

Resolution

0.001 FNU

Enclosure

Stainless steel 1.4571, PPSU, sapphire

Protection

IP68 (Electrical connector IP67)

Sample flow rate

max. 3.0 m/s

Sample temperature

0 .. +60 °C

Sample pressure

max. 10 bar @ 20 °C

Ambient temperature

0 .. +60 °C

Humidity

0 .. 100 % rel.

Supply voltage

24 VDC +/−10 %, galv. Isolated from housing of sensor

Power input

max. 2 W

Dimensions

Ø 40 × 200 mm

Connections

8-wire cable:
- 1 × 0/4 .. 20 mA Output
- 2 × digital outputs

Option Connection box Conn-R:
- 1 × 0/4 .. 20 mA Output
- 2 × Relays Outputs 230 VAC, 4A
- Connector for SICON-C

Option SICON – SICON-M:
- Max. 8 × 0/4 .. 20 mA Outputs
- Max. 7 × digital Outputs
- Max. 5 digital Inputs
- Modbus TCP
- Modbus RTU
- Profibus DP
- HART
- Conn-A for max. 8 Sensors
- Powerbox for max. 12 Relays

Option WLAN:
- IEEE 802.11b/g/n access with web server

Light source

LED 860 nm

Sample connector

Options:
- PE tubing welded
- Stainless steel tubing with flanges welded
- Kit to install directly in basins
- Device to retract the sensor under pressure

Control Units

SICON

 Download data sheet