100% Germany Origin

RTK Vietnam

Spare part for S/N: 14012023/020
(MV 5214 DN 80 PN 16 + ST 5112-34)
Motorized control valve - series MV 5214 (only valve body)
two-way design
nominal diameter DN 80, pressure rating PN 16
body made of spheroidal graphite iron EN-GJS-400-18-LT
flanges according to DIN
spindle packing:
bellows seal with safety stuffing box PTFE/white
characteristic line / flow direction: linear / normal
V-port cone, metal sealing
Motorized control valve - series MV 5214 (only valve body)
Kvs-value = 79 m³/h, stroke 15 mm, seat diameter 65 mm
surface treatment with zinc dust primary coat
max. allowed pressure according to DIN EN 1092
max. allowed temperature TS 350°C
(only valve body required, excluded actuator)

100% Germany Origin

RTK Vietnam

Spare part for S/N: 14012023/030
(MV 5214 DN 100 PN 16 + ST 5112-34)
Motorized control valve - series MV 5214 (only valve body)
two-way design
nominal diameter DN 100, pressure rating PN 16
body made of spheroidal graphite iron EN-GJS-400-18-LT
flanges according to DIN
spindle packing:
bellows seal with safety stuffing box PTFE/white
characteristic line / flow direction: linear / normal
V-port cone, metal sealing
Motorized control valve - series MV 5214 (only valve body)
Kvs-value = 120 m³/h, stroke 25 mm, seat diameter 80 mm
surface treatment with zinc dust primary coat
max. allowed pressure according to DIN EN 1092
max. allowed temperature TS 350°C
(only valve body required, excluded actuator)

100% Germany Origin

RTK Vietnam

Spare part for S/N: 14012023/010
(MV 5214 DN 50 PN 16 + ST 5112-34)
Motorized control valve - series MV 5214 (only valve body)
two-way design
nominal diameter DN 50, pressure rating PN 16
body made of spheroidal graphite iron EN-GJS-400-18-LT
flanges according to DIN
spindle packing:
bellows seal with safety stuffing box PTFE/white
characteristic line / flow direction: linear / normal
V-port cone, metal sealing
Motorized control valve - series MV 5214 (only valve body)
Kvs-value = 30 m³/h, stroke 15 mm, seat diameter 40 mm
surface treatment with zinc dust primary coat
max. allowed pressure according to DIN EN 1092
max. allowed temperature TS 350°C
(only valve body required, excluded actuator)