OHKURA Vietnam, VM8100A, Bộ ghi dữ liệu VM8100A, đại lý OHKURA Vietnam

 

The VM8100A is a paperless recorder that employs a 5.7-inch TFT liquid crystal display. It uses CompactFlash (referred to as "CF cards" hereafter) for its recording media, and is also equipped with network functions as standard. Its input types can include thermocouples, resistance temperature detectors, and DC voltage (current), which can be set as desired in up to 12 channels. Aside from input, calculation processes can be performed in up to 48 channels. Data currently being recorded and data stored on CF cards can be viewed on the display. They can also be viewed on a PC using the included viewer software.
Features

■Achievement of high-speed multi-point capture
By providing independent measurement circuits in each channel, high-speed sampling can be performed at all points in up to 12 channels.

■Simple control using a touch panel
Intuitive touch panel control allows the unit to be used easily.

■Equipped with large-capacity built-in memory
Equipped with large-capacity built-in memory that is roughly 450 MB in size. Long-term recording can be performed using only the main unit.

■CF cards are employed as external recording media
Compatible with CF cards up to 8 GB, allowing recording over extended periods. USB memory devices can also be used as an option.
(Includes a 1 GB CF card as standard)

■Compatibility with existing RM10G recorer
The structure of the rear terminal block is designed for compatibility with existing RM10G recorder. If an existing unit is replaced, the existing wiring and other components can be used as they are. A terminal block that can accommodate input from a greater number of channels is also available.

■Integrated structure of internal units
Since the calibration components are all located in internal devices, it is possible to perform calibration with the internal devices only, while leaving the case wiring intact (excluding TC).

■Diverse displays only possible with a paperless device
On-screen buttons can be used to easily switch between bar graph displays, trend displays, and digital displays. The displays that can be viewed are highly flexible in accordance with the application. Also, highlighting of trend displays or setting confirmation can be performed by touching the applicable channel.

■Equipped with calculation functions
In addition to basic arithmetic operations and totalization functions that can be performed on input, calculation functions that can record data obtained from DI or by communication methods as measurement values are also provided.

■Standard inclusion of PC support software
Software including parameter loaders that can be used to set parameters on a PC, and data viewer software that can be used to view and analyze measured data, are included as standard accessories.

■Compatible with 2 types of external configurations and panel cutouts
Designed for compatibility with RM10G recorder, and compatible with 2 types of external configurations and panel cutouts.

■Equipped as standard with communication functions using Ethernet
FTP server/client functions, HTTP server functions, SNTP client functions, and ModBus TCP functions can be used.

■Communication functions (option)
Aside from Ethernet, RS-485 is available as an option, allowing communication by Modbus RTU.

■Earthquake-resistant structure (option)
By securing the device with earthquake-resistant supports, it can be made to withstand vibrations of 2G in the up-down direction and 4G in the front-back and left-right directions.

■Handwritten comment function (V1.20 and later)
Comments can be entered in handwritten form on historical trends.