Mr. Hà
live:ha_1652Motrona Vietnam, MC700, MC700-FS701, Bộ điều khiển chuyển động MC700, Đại lý chính hãng Motrona Vietnam
Firmware for MC700 Motion Controller
- Make sure you have installed the motrona OS 5.1 software on your PC
- Use the right mouse key to save the desired firmware to your PC
- Download the firmware from PC to MC700 by following the instructions given in the manual
- Set your specific parameters and run the Adjust Menu
- You will be able to run all adjusting and testing functions without a license key
- Get your license key from motrona and enter it to the unit to run production mode
Synchronization of Drives for MC700
With the use of BY701 firmware, the MC700 controller provides excellent solutions with all kinds of multi-axes synchronizing applications. Numerous possibilities for control of relative phase, position, index and print mark evaluation are available.
Eccentric Material Processing
The Firmware CT701, in combination with the controller MC700 offers a maximum processing performance with guillotines or eccentric shears in cut-to-length-lines.
Extended Eccentric Material Processing for MC700
Heavy-duty version with enhanced features for cutting of thick or hard sheet steel (e.g. high-grade stainless steel).
Further information on demand.
Ct701e.zip (172 KB)
Rotating Cross Cutters for MC700
Rotary cutters and other rotary applications require high dynamics, precise cuts and short position control cycles. These requirements will be complied by using the CT703 firmware and the MC700 motion controller.
Typical applications are intermittent or rotary operations like cutting, perforating, printing, sealing, adhesion, applying, labeling and many more.
Flying Saws, Shears, Punchers etc. for MC700
With the use of FS701 firmware, the MC700 controller provides excellent solutions with all kinds of flying cut-to-length systems as well as with applications like labeling, printing punching, sealing, etc.
Tubular Bag Packing Machine for MC700
Due to highly dynamic motion profiles, the combination of firmware TB701 and MC700 controller works very precisely and is optimized for tubular bag packaging machines (e. g. "pillow packaging").
Winding and Tension Controller
Firmware and license code on demand.
Traverse Controller
Firmware and license code on demand.
