Mr. Hà| THERMOJACKET: EXTRA RUGGED CAST METAL HOUSING FOR THERMAL, MECHANICAL, & ENVIRONMENTAL PROTECTION FOR MARATHON SENSORS, AND TX SENSORS. | |||
| RAYTXXTJ3 | ThermoJacket housing for TX sensors | ||
| THERMOJACKET ACCESSORIES | |||
| XXXTXXMF | Mounting Flange for ThermoJacket | ||
| XXXTXXMB | Adjustable mounting base for ThermoJacket | ||
| XXXTXXGTQ | Blast Gate Assembly with Quartz Window (HT model) | ||
| XXXTXXGTA | Blast Gate Assembly with Amtir Window (LT, MT, G5, P7 models) | ||
| XXXTXXAPA | Adjustable Pipe Adapter assembly | ||
| XXXTXXMST | Mounting flange for use with sighting tubes | ||
| XXXTSTC12 | 30 cm (12") sighting tube, ceramic (up to 1500°C) | ||
| XXXTST12 | 30 cm (12") sighting tube, stainless steel (up to 800°C) | ||
| BEESIGHTT | 30 cm (12") sighting tube, carbon steel with 45 degree end cut and slotted weep hole at base | ||
| FLOW REGULATORS: FOR USE WITH COOLING/PURGING OPTIONS AND ACCESSORIES | |||
| XXXTXXWR | Water flow regulator (water cooling) | ||
| XXXTXXAR | Air purging flow regulator assembly with air filter | ||
| XXXTXXCAFR | Cooling air flow regulator (high capacity) | ||
| THERMOJACKET & ACCESSORIES | |||
| THERMOJACKET: EXTRA RUGGED CAST METAL HOUSING FOR THERMAL, MECHANICAL, & ENVIRONMENTAL PROTECTION FOR MARATHON SENSORS, AND TX SENSORS. | |||
| RAYTXXTJ3 | ThermoJacket housing for TX sensors | ||
| RAYTXXTJ4 | ThermoJacket housing for Marathon MM Sensors | ||
| RAYTXXTJ5 | ThermoJacket housing for XR sensors | ||
| THERMOJACKET ACCESSORIES | |||
| XXXTXXMF | Mounting Flange for ThermoJacket | ||
| XXXTXXMB | Adjustable mounting base for ThermoJacket | ||
| XXXTXXGTQ | Blast Gate Assembly with Quartz Window (HT model) | ||
| XXXTXXGTA | Blast Gate Assembly with Amtir Window (LT, MT, G5, P7 models) | ||
| XXXTXXAPA | Adjustable Pipe Adapter assembly | ||
| XXXTXXMST | Mounting flange for use with sighting tubes | ||
| XXXTSTC12 | 30 cm (12") sighting tube, ceramic (up to 1500°C) | ||
| XXXTST12 | 30 cm (12") sighting tube, stainless steel (up to 800°C) | ||
| BEESIGHTT | 30 cm (12") sighting tube, carbon steel with 45 degree end cut and slotted weep hole at base | ||
| XXX2CFT | Focus Adjustment Tool, for use when MR1S sensors are installed in a Thermojacket. | ||
| BF2TJEXTENDER | ThermoJacket Extension flange for CCD camera accessories mounted on MR Sensor in ThermoJacket | ||
| BD3TJBACK | ThermoJacket Rear cover with Peep-sight used for sighting Marathon models without removal | ||
| XXXGTQHTW | Replacement Quartz Window for Blast Gate Assembly | ||
| JNTHDKIT | Conversion Kit to install TX into existing Thermo-Jacket | ||
| JNTORINGKIT | 5 complete O-ring sets for service of ThermoJackets | ||
| FLOW REGULATORS: FOR USE WITH COOLING/PURGING OPTIONS AND ACCESSORIES | |||
| XXXTXXWR | Water flow regulator (water cooling) | ||
| XXXTXXAR | Air purging flow regulator assembly with air filter | ||
| XXXTXXCAFR | Cooling air flow regulator (high capacity) | ||
| Raynger® 3i Plus | |||
| RAYR3IPLUS1ML | 1 micron w/ Dual laser (EN60825 Class 2, FDA Class II) DS 250:1, 700°C to 3000°C (1292 to 5432°F), Bluetooth 4.0, USB |
||
| RAYR3IPLUS1MSCL | 1 micron w/ Dual laser (EN60825 Class 2, FDA Class II) + Scope DS 250:1, 700°C to 3000°C (1292 to 5432°F), Bluetooth 4.0, USB |
||
| RAYR3IPLUS2ML | 1.6 micron w/ Dual Laser (EN60825 Class 2, FDA Class II) DS 250:1, 400°C to 2000°C (752 to 3632°F), Bluetooth 4.0, USB |
||
| RAYR3IPLUS2MSCL | 1.6 micron w/ Dual Laser (EN60825 Class 2, FDA Class II) + Scope, DS 250:1, 400°C to 2000°C (752 to 3632°F), Bluetooth 4.0, USB |
||
| RAYR3IPLUSNBT1ML | 1 micron w/ Dual laser (EN60825 Class 2, FDA Class II) DS 250:1, 700°C to 3000°C (1292 to 5432°F), USB |
||
| RAYR3IPLUSNBT1MSCL | 1 micron w/ Dual laser (EN60825 Class 2, FDA Class II) + Scope DS 250:1, 700°C to 3000°C (1292 to 5432°F), USB |
||
| RAYR3IPLUSNBT2ML | 1.6 micron w/ Dual Laser (EN60825 Class 2, FDA Class II) DS 250:1, 400°C to 2000°C (752 to 3632°F), USB |
||
| RAYR3IPLUSNBT2MSCL | 1.6 micron w/ Dual Laser (EN60825 Class 2, FDA Class II) + Scope, DS 250:1, 400°C to 2000°C (752 to 3632°F), , USB |
||
| 3IPLUS Accessories | |||
| XXXR3IPLUSCC | Carrying case | ||
| XXXR3IPLUSSTRAP | Neck strap | ||
| XXXR3IPLUSACCU | 
|
||
| XXXR3IPLUSPS | Mini USB port adaptor with multi-country power plug | ||
| (100 – 240 VAC, 50/60 Hz), including SAA, EU, UK, US and CCC | |||
| XXXR3IPLUSPSCON | Mini USB-to-DC jack converter for charging battery separately | ||
| XXXR3IPLUSUSBCB | Computer cable with USB-to-Mini USB, 1.5 m (4.9 ft) | ||
| Raytek® MP150 Linescanner | |||
| RAYTMP150-LT | 20 to 350°C (68 to 662°F), 3 to 5 µm | ||
| RAYTMP150-MT | 100 to 800°C (212 to 1472°F), 3.9 microns | ||
| RAYTMP150-G5 | 100 to 950°C (212 to 1742°F), 5 microns | ||
| RAYTMP150-P30 | 30 to 250°C (86 to 482°F), 3.43 microns | ||
| RAYTMP150-P31 | 100 to 350°C (212 to 662°F), 3.43 microns | ||
| RAYTMP150-1M | 600 to 1200°C (1112 to 2192°F), 1 micron | ||
| RAYTMP150-2M | 400 to 950°C (752 to 1742°F), 1.6 micron | ||
| RAYTMP150-HR | 100 to 650°C (212 to 1202°F), 3.5 to 4 micron HR scanners are purpose built for cement scanning applications and include an internal heater and special focus distance as standard equipment. They are not equipped with a High Pressure Air Purge (HPAP). As such the only available part number is RAYTMP150HRR1. |
||
| Comunication Option R | RJ-45: Scanner data link is configured to plug into any standard RJ45 Ethernet network socket | ||
| Data Point Option (0) | Standard configuration: 512 data points per scan line (up to 80Hz), 256 data points (80 to 150Hz) | ||
| Data Point Option (1) | Enhanced configuration: 1024 data points per scan line (up to 40Hz), 512 data points per scan line (40 to 80Hz), 256 data points (80 to 150Hz) | ||
| XXXTMP150CERT | Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item) | ||
| MP150 INFRARED LINESCANNER ACCESSORIES | |||
| XXXHSFIC1 | High Speed Fiber-Optic/RJ45 Converter (1 Channel) | ||
| XXXHSFIC4 | High Speed Fiber-Optic/RJ45 Converter (4 Channel) | ||
| XXXHSFICBOX | BOX FOR FIBER OPTIC/RJ45 CONVERTER + PS | ||
| SVCOSSAPKG | On-site Start-up and Commissioning Service (North America Only) | ||
| XXXTMP50ACMP | Mounting Plate for setting on a Tripod | ||
| XXXTMP50ACRMB | Adjustable Rugged Mounting Base, includes scanner mounting plate | ||
| XXXTXXWR | Water Flow Regulator | ||
| XXXTMP50THERM | Thermostatic Control System | ||
| XXXTXXCAFR | Air Flow Regulator, high capacity, for purging window | ||
| XXXTMP50ACFG | Laser Enhancing Filter Eyeglasses for laser sighting | ||
| XXXTMP50SPSCB | Spare MP50 power cable, 180°C max. 7.5 meters (25 ft.) long | ||
| XXXTMP50SPSCB10 | Spare MP50 power cable, 180°C max. 10 meters (33 ft.) long | ||
| XXXTMP150SPETHCB | Spare MP150 Ethernet cable, 180°C max. 7.5 meters (25 ft.) long | ||
| XXXTMP150SPETHCB10 | Spare MP150 Ethernet cable, 180°C max. 10 meters (33 ft.) long | ||
| XXXTMP50S485CB | Spare MP50 RS485 Cable with RS232 converter,180°C max. 7.5 meters (25 ft.) long | ||
| XXXTMP50S485CB10 | Spare MP50 RS485 Cable with RS232 converter,180°C max. 10 meters (33 ft.) long. | ||
| XXXTMP50S4PCN | Spare MP50 4-pin connector | ||
| XXXTMP50S6PCN | Spare MP50 6-pin connector | ||
| XXXTMP50AC485CV | Spare RS485 converter for MP50 (no cable) | ||
| XXXSYS485CV | RS232/RS485 Converter (required for Output Modules). | ||
| XXXSYSPS | 24VDC power supply (100/240),1.3 amps | ||
| XXXUSB485 | USB to RS232/422/485 converter | ||
| XXXTMP150ACSWK1M | SPARE WINDOW FOR MP1501M | ||
| XXXTMP150ACSWK2M | SPARE WINDOW FOR MP1502M | ||
| XXXTMP150ACSWKG5 | SPARE WINDOW FOR MP150G5 | ||
| XXXTMP150ACSWKHR | SPARE WINDOW FOR MP150HR | ||
| XXXTMP150ACSWKLT | SPARE WINDOW FOR MP150LT | ||
| XXXTMP150ACSWKMT | SPARE WINDOW FOR MP150MT | ||
| XXXTMP150ACSWKP3 | SPARE WINDOW FOR MP150P3 | ||
| XXXTMP150FSNPT | NPT Fitting Set | ||
| XXXTMP150FSISO | ISO Fitting Set | ||
| XXXTMP150ACCC | Carrying case | ||
| High Temp Enclosure | |||
| XXXSYSENC | Enclosure & Base Stainless steel enclosure with mounting base and integrated fail-safe shutter, includes grommet plates for wiring and cooling water (if req'd) and mounting aperture for high performance vortex cooler |
||
| XXXSYSENCICP | Internal Cold-Plates Internal cold plates designed to cool scanner directly, Eliminates the need to disconnect plumbing fittings to remove scanner, supplied pre-connected with high temperature hoses - supplied as set of two. |
||
| SYSENCVT | High Performance Vortex Cooler Separates compressed air (or nitrogen) into hot and cold streams to actively cool enclosure interior |
||
| XXXSYSENCWCS | Water Cooled Shield Stainless steel high performance water shield. One inch water inlet and outlet permit high flow rates and extremely high heat removal capability. |
||
| XXXSYSENCIS | Insulating Shield A custom stainless steel envelope filled with high performacne refractory material. Placed closest to the process, it prevents heat form entering the enclosure and lessens the heat removal requirements of other elements. |
||
| TF150 Process Imaging System for Thermoforming | |||
| RAYTTF150-LT | TF150 System with MP150LT 20 to 350°C (68 to 572°F), 3 to 5 microns | ||
| RAYTTF150-MT | TF150 System with MP150MT, 100 to 800°C (212 to 1472°F), 3.9 microns | ||
| RAYTTF150-P30 | TF150 System with MP150P30, 30 to 250°C (86 to 482°F), 3.43 microns | ||
| RAYTTF150-31 | TF150 System with MP150P31, 100 to 350°C (212 to 662°F), 3.43 microns | ||
| OPTION FOR TF150 | |||
| XXXTMP150CERT | Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item) | ||
| XXXTMP50ACRMB | Adjustable Rugged Mounting Base (includes scanner mounting plate) | ||
| XXXHSFIC1 | High Speed Fiber-Optic/RJ45 Converter (1 Channel) | ||
| XXXHSFIC2 | High Speed Fiber-Optic/RJ45 Converter (4 Channel) | ||
| XXXHSFICBOX | Housing, Fiber optic/RJ-45 converter and power supply | ||
| SVCOSSAPKG | On-site Start-up and Commissioning Service (North America Only) | ||
| GS150/GS150LE Process Imaging System for Glass Processing | |||
| RAYTGS150G5R1 | specifies a Glass System with a low temperature 5µm linesscanner with RJ-45 type cable and 1024 maxmum data points per scan line. | ||
| RAYTGS150G5R0 | specifies a Glass System with a low temperature 5µm linesscanner with RJ-45 type cable and 1024 maxmum data points per scan line. | ||
| UPGRADES | |||
| RAYTGS150LEUPGRADE | The GS150LE system was developed specifically to monitor glass which has been coated on one side with a low-emissivity coating. Includes specialized MI3 sensor and GS150LE software, air-purge jacket, PC connection Kit | ||
| OPTIONS | |||
| XXXTMP150CERT | Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item) | ||
| XXXTMP50ACRMB | Adjustable Rugged Mounting Base (includes scanner mounting plate) | ||
| XXXHSFIC1 | High Speed Fiber-Optic/RJ45 Converter (1 Channel) | ||
| XXXHSFIC2 | High Speed Fiber-Optic/RJ45 Converter (4 Channel) | ||
| XXXHSFICBOX | Housing, Fiber optic/RJ-45 converter and power supply | ||
| SVCOSSAPKG | On-site Start-up and Commissioning Service (North America Only) | ||
| ES150 Process Imaging System for Film and Flat Sheet Extrusion or Continuous Web Processes | |||
| RAYTES150-LT | ES150 System with MP150LT 20 to 350°C (68 to 572°F), 3 to 5 microns | ||
| RAYTES150-MT | ES150 System with MP150MT, 100 to 800°C (212 to 1472°F), 3.9 microns | ||
| RAYTES150-G5 | ES150 System with MP150G5, 100 to 950°C (212 to 1742°F), 5 microns | ||
| RAYTES150-P30 | ES150 System with MP150P30, 30 to 250°C (86 to 482°F), 3.43 microns | ||
| RAYTES150-P31 | ES150 System with MP150P31, 100 to 350°C (212 to 662°F), 3.43 microns | ||
| RAYTES150-1M | ES150 System with MP1501M, 600 to 1200°C (1112 to 2192°F), 1 micron | ||
| RAYTES150-2M | ES150 System with MP1502M, 400 to 950°C (752 to 1742°F), 1.6 micron | ||
| OPTIONS | |||
| XXXTMP150CERT | Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item) | ||
| XXXTMP50ACRMB | Adjustable Rugged Mounting Base (includes scanner mounting plate) | ||
| XXXHSFIC1 | High Speed Fiber-Optic/RJ45 Converter (1 Channel) | ||
| XXXHSFIC2 | High Speed Fiber-Optic/RJ45 Converter (4 Channel) | ||
| XXXHSFICBOX | Housing, Fiber optic/RJ-45 converter and power supply | ||
| SVCOSSAPKG | On-site Start-up and Commissioning Service (North America Only) | ||
| EC150 Process Imaging System for Film and Flat Sheet Extrusion or Continuous Web Processes | |||
| RAYTEC150-P30-R | EC150 System with MP150P30, 30 to 250°C (86 to 482°F), 3.43 microns | ||
| RAYTEC150-P31-R | EC150 System with MP150P31, 100 to 350°C (212 to 662°F), 3.43 microns | ||
| OPTIONS | |||
| XXXTMP150CERT | Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item) | ||
| XXXTMP50ACRMB | Adjustable Rugged Mounting Base (includes scanner mounting plate) | ||
| XXXHSFIC1 | High Speed Fiber-Optic/RJ45 Converter (1 Channel) | ||
| XXXHSFIC2 | High Speed Fiber-Optic/RJ45 Converter (4 Channel) | ||
| XXXHSFICBOX | Housing, Fiber optic/RJ-45 converter and power supply | ||
| SVCOSSAPKG | On-site Start-up and Commissioning Service (North America Only) | ||
| CS210 Infrared Linescanning System for Rotary Kilns | |||
| RAYTCS211R1 | CS211 Rotating Kiln System (Single Scanner) Linescanner MP150HR Protective Housing XXXSYSPHSS, stainless steel Position Indicator with junction box (XXXSYSSECPI) System Connection Box (field) CS210CONBOX Fibre Optic Converter Housing XXXHSFICBOX (control room DataTemp CS Software Documentation |
||
| RAYTCS212R1 | CS212 Rotating Kiln System (Dual Scanner) 2 Protective Housings XXXSYSPHSS, stainless steel Position indicator with junction box (XXXSYSSECPI) 2 System Connection Boxes (field) CS210CONBOX Fibre Optic Converter Housing XXXHSFICBOX (control room) DataTemp CS Software Documentation |
||
| RAYTCS213R1 | CS213 Rotating Kiln System (Triple Scanner) 3 Linescanners MP150HR 3 Protective Housings XXXSYSPHSS, stainless steel Position indicator with junction box (XXXSYSSECPI) 3 System Connection Boxes (field) CS210CONBOX Fibre Optic Converter Housing XXXHSFICBOX (control room) DataTemp CS Software Documentation |
||
| RAYTCS214R1 | CS214 Rotating Kiln System (Quad Scanner) 4 Linescanners MP150HR 4 Protective Housings XXXSYSPHSS, stainless steel Position indicator with junction box (XXXSYSSECPI) 4 System Connection Boxes (field) CS210CONBOX Fibre Optic Converter Housing XXXHSFICBOX (control room) DataTemp CS Software Documentation |
||
| RAYCS210EXT | CS21x Extension KIT Maximum Extension up to a four Scanner System 1 Scanner RAYTMP150HRR1 1 Stainless Steel protective housing incl. Mounting Base XXXSYSPHSS 1 System Connection Box XXXCS210CONBOX Scanner Cable Set LT New License file (Serial number from all existing scanners needed with P.O.) |
||
| ACCESSORIES | |||
| XXXSYSCS210CON | Serial Ethernet Converter | ||
| Please note: Always necessary to connect with following components:XXXTCSLRM210, FAN Control Hardware, XXXTCS200BZ and XXXTCS200SM | |||
| XXXCS210CONBOX | CS210CONBOX,CS210 SYSTEM CONNECTION BOX | ||
| XXXCS210ENCON | Endurance Connection Box | ||
| XXXSYS16DA* | RS485 Remote Controller with 16 Digital-Outputs | ||
| XXXSYS7RA | 7-Channel Relays Output Modul | ||
| XXXTCS210BZ | Burning Zone Monitoring: Endurance Connection Box Endurance Ratio Pyrometer, 600 to 1800°C 15 m High Temperature Cable ThermoJacket Housing for E-TJ1 Blast Gate Assembly with Quartz Window 30 cm sighting tube, stainless steel Adjustable Pipe Adapter assembly Adjustable Mounting Base for Thermojacket Air Flow/Pressure Regulator Assembly |
||
| XXXTCS200SM | Shadow Monitoring: consists of MI Connection Box, MIH Sensor -40 to 600°C, 8 m high temperature cable, Air Purge Jacket, stainless steel, Adjustable Mounting Bracket. | ||
| XXXTCSLRM210 | Live Ring Migration for CS210 System, complete with LRM Remote Controller & 3 position indicators | ||
| XXXSYSLDM | Laser distance meter | ||
| XXXPi20FO1 | Fiber Optic Cable 150 m | ||
| XXXPi20FO2 | Fiber Optic Cable 300 m | ||
| SVCOSSAPKG | On-site Start-up and Commissioning Service (Item # 2509605/North America only) | ||
| XXXSYS4AA | Analog Output Module (4 channels, mA or V) | ||
| XXXSYS485CV | RS232/RS485 Converter (required for Output Modules) | ||
| CS100/200 UPGRADES to CS210 | |||
| XXXCS210BUPGRADE | Basic Upgrade to CS Software. This is not a full upgrade to the level of CS210 Not all functions of CS210 Upgrade are supported. No new wiring of system needed. |
||
| XXXCS211BUPGRADE | CS101 to CS211 (1 scanner system) Basic System Upgrade without new Scanner. This upgrades requires the use of the MP150 line scanner to utilize all funcitonality. Will work with MP50 (older generation) but not all features will be available New wiring of system needed. |
||
| XXXCS212BUPGRADE | CS102 to CS212 (2 scanner system) Basic System Upgrade without new Scanner. This upgrades requires the use of the MP150 line scanner to utilize all funcitonality. Will work with MP50 (older generation) but not all features will be available New wiring of system needed. |
||
| RAYCS211FUPGRADE | Full System Upgrade (1 scanner system) with new Scanner MP150. New wiring of system needed. Accessories analogous to a new CS211 system. |
||
| RAYCS212FUPGRADE | Full System Upgrade (2 scanner system) with new Scanner MP150. New wiring of system needed. Accessories analogous to a new CS212 system. |
||
| CS210 Infrared Linescanning System for Rotary Kilns Upgrades & Accessories | |||
| XXXTCS3D210 | 3D View Software Upgrade for existing CS210 systems | ||
| XXXTCSRFM210 | Refractory Management Software (incl. 3D Software) Upgrade for existing CS210 Systems | ||
| XXXCS210CONBOX | CS210 System Connection Box | ||
| XXXCS210ENCON | Endurance Connection Box | ||
| E1RL-F2-L-0-0 | Endurance Ratio Pyrometer, 600 to 1800°C | ||
| A-CB-HT-M16-W12-15 | 15 m High Temperature Cable, 200°C | ||
| A-TJ-EN | ThermoJacket Housing for Endurance | ||
| XXXTXXGTQ | Blast Gate Assembly with Quartz Window (HT models) | ||
| XXXTST12 | 30 cm sighting tube, stainless steel | ||
| XXXTXXAPA | Adjustable Pipe Adapter assembly | ||
| XXXTXXMB | Adjustable Mounting Base for Thermojacket | ||
| XXXTXXAR | Air Flow/Pressure Regulator Assembly | ||
| XXXSYSCS200MICON | MI Connection Box (necessary for MIH Sensor) | ||
| RAYMI310LTHCB8 | MI3 Sensor, -40 to 600°C, 8 to 14 µm, D:S 10:1, 130 ms, 8 m cable | ||
| D82MIACAJ | Air Purge Jacket, stainless steel | ||
| XXXMIACAB | Adjustable Mounting Bracket | ||
| RAYTMP150HRR1 | Kiln Scanner RAYTMP150HRR1 | ||
| XXXSYSPS1 | Industrial Power Supply Extra 240VAC/24VDC/2,5A | ||
| XXXSYSPHSS | Stainless Steel Protective Housing | ||
| XXXSYSECPI | Position Indicator | ||
| XXXSYSPHSW | Protective Window For SYSPHSS | ||
| XXXHSFIC4 | High Speed Fiber-Optic/RJ45 Converter (4 canals) | ||
| XXXSYSCONNBOXHEAT | Heater System | ||
| XXXTMP150FSNPT | NPT Fitting Set | ||
| XXXTMP150FSISO | ISO Fitting Set | ||
| XXXTCSLRMMCONNBOX | LRM Remote Control box | ||
| MP150 SYSTEM ACCESSORIES - ES150, EC150, TF150 and GS150 | |||
| RAYSYSSOFTWARE | MP150 systemsoftware DTDP | ||
| XXXSYSPS | Ind. Power Supply Standard 100VAC to 240VAC/24VDC/1.3A for DIN rail mounting | ||
| XXXSYSPS1 | Industrial Power Supply 100VAC to 240VAC/24VDC/2.5A for DIN rail mounting | ||
| XXXETHBASICKIT | Basic Kit for Output Adding | ||
| XXXETH16DI | 16-Channel Digital Input | ||
| XXXETH16DO | 16-Channel Digital Output | ||
| XXXETH2AISO | Passive Current Isolator | ||
| XXXETH2AOC0 | Analog Output Module 0-20 mA (2 each) | ||
| XXXETH2AOC4 | Analog Output Module 4-20 mA (2 each) | ||
| XXETH2AOV | Analog Voltage Output Module | ||
| XXXETH2R | Output Relay (2 each) | ||
