zkz-2t-speed-monitoring-device-xinda-vietnam.png

ZKZ-2T speed monitoring device Xinda Vietnam, ZKZ-2T speed monitoring device Xinda Viet nam, ZKZ-2T xinda vietnam , ZKZ-2T xinda viet nam, ZKZ-2T viet nam , ZKZ-2T vietnam

One, overview

ZKZ-2T type speed monitoring device of an external voltage transformer or permanent magnet machine signal, real-time monitoring of water turbine generator set speed, and in each unit speed output switch quantity signal and unit speed corresponds to the analog signal, to automatically open, shutdown and power monitoring system.

In two, features

ZKZ-2T speed monitoring device set frequency table, tachometer, speed, speed relay testing instrument in one, is a multipurpose speed monitoring instrument;

The speed measurement using a variable gate side cycle of advanced measurement principle, has the advantages of high measuring precision, real-time characteristic;

The device to measure and control the precision depends only on crystal oscillator error and stability, thus speed contact export value can be maintained for a long term running without change;

The speed contact output using return difference latching means to prevent the output waveform distortion caused by misoperation, according to the power needed for the operation, at the scene can be conveniently on the8speed value of exports was certain range setting.

The device also has the standard4 ~20mA current output, optional RS485( MODBOS RTU ) communication output, can conveniently and whole plant computer monitoring system connection.

Three, technical performance

Measurement signal paths: one way Ma signal, a PT signal ( or permanent magnet machine signal )

Measuring frequency range: 0.05~ 100Hz

Measurement accuracy: nonlinearity < 1%, < 0,2% speed dead-band

The digital content: generator frequency, speed percentage, each output setting.

The switch output signal: speed signal: 8, every point by the user in a certain range setting.

The device power supply failure alarm signal: 1

Analog output : 4 ~20mA ( corresponding to the set speed0%Ne ~ 200%Ne )

The communication output: RS485( MODBOS RTU )

Work environment:0to 50 DEG C temperature humidity is lower than 85%

Outline dimensions:160x 80 x250mm dish

Working mode: continuous

The power: DC110~ 340V or AC85~ 265V /50Hz

The power:12W

Four, work principle

Taken from the generator voltage transformer or permanent magnet machine of the sine wave signal, the signal transformer isolation, filtering limiting processing input to the amplifying and shaping circuit, then converted into frequency and the input signal of the same square wave signal into the microcontroller counts. The microcontroller through numerical changes, will reflect the signal cycle counting value is converted to frequency, speed percentage and set parameters. SCM system will be converted to the unit 's characteristic parameters display, memory, and with a preset stall speed alarm value, the drive circuit to the corresponding relay.