Smartmeasurement Vietnam, ACONE, ALDP-3051, ALDP-1151, ALDPMV, đại lý Smartmeasurement Vietnam

 

Differential Pressure Flowmeters

Differential Pressure Flow Meters consist of a flow body containing some type of throttle restriction with known characteristics, such as a venturi, orifice, cone, or segmented wedge. This restriction creates a differential pressure between a pressure tap (P1) upstream of the restriction and a pressure tap downstream of the restriction (P2) which is proportional to the square of the volumetric flow rate. For a more detailed discussion of the principle of operation, please go to: http://www.smartmeasurement.com/flow-meters/differential-pressure/measuring-principle

Differential Pressure Flow Meters are excellent for very low flows or low Reynolds numbers (Re. < 500), high-viscosity fluids which contains dust or solid particles, or applications for measuring flows of liquid cement, crude oil flow meters, asphaltic oil, coal-tar oil, wastewater, hard pulp,  carbon black solution, asphaltic oil, coal-tar oil, wastewater, hard pulp, carbon black solution, as well as two phase flows. SmartMeasurementTM offers Cone-Type Differential Pressure flowmeters as well as a wide selection of Differential Pressure (DP) transmitters that can be used with a customer-supplied Differential Pressure element. Volumetric calculations can be performed with the ALDP-3051 transmitter with the ALDP-3051MV multivariable transmitter has the ability to perform mass flow calculations. Please see the Differential Pressure matrix below for the best fit device for your application.

Have a Question? Contact the experts at Smart Measurement today

Request for Quote Today

 
 
 
 
 

.

Differential Pressure CapabilitiesHover mouse over icon for application notes

 

Differential Pressure Flow Meters

 
ALDP Family
Technology Model Diameters Flow Rate Accuracy Pressure Temperature Materials Approvals Special Features

Cone Meters
ACONE ½"~120"
(15~3000mm)
Based on Re > 8000 For Gases, Liquid and Steam Liquid: ± 0.5% of Rd,
Gas & Steam: ± 1.0% of Rd
61,000 psig
(420 Mpa)
320~1500°F
(-196~850 °C)
304L/SS 306L, CPVC ,PTFE, Brass, A106B A335-P11, A335-P22, Dual - Phase Steel, Inconel 625, Hastelloy C276 CE and ExibIICT6 or Explosion Proof ExdIICT6 Piping requirements; ONLY 0-3 Φ upstream and 0-1 Φ downstream

DP Transmitters

ALDP-3051

ALDP-1151

Depends on primary element  (see ACONE) Depends on primary element  (see ACONE) Accuracy GRADE 0.075, 0.2, 0.5 DP: 0~0.16 kPa to 0~10 Mpa,
RP max 0~40 Mpa, min 0~0.16 Kpa
AP max 0~25 Mpa, min 0~20 Kpa
-40~256 °F
(-40 ~ 125 °C)
316SS, Tantalum and other exotic materials CE and ExibIICT6 or Explosion Proof ExdIICT6 ART protocol, Profibus, or FOUNDATION fieldbus

DP-MV-Multivariable
ALDPMV Depends on primary element  (see ACONE) Depends on primary element  (see ACONE) Accuracy GRADE 0.075, 0.2, 0.5 5800PSI (40 MPa) -40~256 °F
(-40 ~ 125 °C)
316SS, Tantalum and other exotic materials CE and ExibIICT6 or Explosion Proof ExdIICT6 Multi-functional: a single transmitter provides up to three measured values