913-402-000-013-A1-E095-F0-G000  Vibro meter Vietnam, Proximity measuring system, CE311 - CE110i - Cảm biến độ rung Vibro meter Vietnam

 

Meggitt Vibrometer manufactures high quality proximity system extension cables.

 

All dimensions are in mm unless otherwise stated.

  1. The total system length = TQ 402/412 integral cable length + Extension cable length (E).

  2. When optional protection such as a flexible stainless steel hose with or without an FEP sheath is ordered: Flexible hose length (G) max. = Extension cable length (E) − 150 mm, for an extension cable that is protected to the maximum extent possible (“cable fully covered”).

Physical characteristics 

 

Transducer construction

:

Wire coil Ø 8 mm, Torlon (polyamide-imide) tip, encapsulated in stainless steel body (AISI 316L) with high-temperature epoxy glue

 

Integral and extension cables

:

FEP covered 70 Ω coaxial cable, Ø 3.6 mm

 

Connectors

:

Self-locking miniature coaxial connectors.

Note: When connecting, these should be hand-tightened until locked.

 

Optional protection

•Flexible stainless steel hose(protection tube)

:

The stainless steel hose provides additional mechanical protection but is not leak-tight.

 

•FEP sheath(extruded fluorinated ethylene propylene)

:

The FEP sheath provides resistance to almost all chemicals and low permeability to liquids, gases and moisture. It is also flexible, low friction and mechanically tough.

 

 

 

 

 Available in Ex approved versions for use in hazardous locations 

 

 Type of protection Ex i: intrinsic safety 

 

 Europe 

 EC type examination certificate 

 LCIE 11 ATEX 3091 XII 1G (zones 0, 1, 2)Ex ia IIC T6 to T3 Ga 

 International 

 IECEx certificate of conformity 

 IECEx LCI 11.0061XEx ia IIC T6 to T3 Ga 

 North America 

 CCSAUS certificate of compliance 

 1514309 Class I, Divisions 1 and 2, Groups A, B, C, DEx ia 

 

 

 

 

 Type of protection Ex nA: non-sparking apparatus 

 

 Europe 

 Voluntary type examination certificate 

 LCIE 11 ATEX 1010 XII 3G (zone 2)Ex nA II T6 to T3 Gc 

 International 

 IECEx certificate of conformity 

 IECEx LCI 11.0063XEx nA II T6 to T3 Gc 

 North America 

 CCSAUS certificate of compliance 

 1514309 Class I, Division 2, Groups A, B, C, D