thiet-bi-do-luc-khit-cua-nap-chai-torqo-1600-non-destructive-cap-torque-tester.png

Thiết Bị Đo Lực Khít Của Nắp Chai Torqo 1600 Non-Destructive Cap Torque Tester

Hãng sản xuất: Mesalabs

Liên hệ tư vấn

Mr. Trí

tri@pitesco.com

0912 300 549

Thiết Bị Đo Lực Khít Của Nắp Chai Torqo 1600 Non-Destructive Cap Torque Tester

Benefits

  • Accurate & repeatable results
  • Reduce product & packaging waste
  • Perform non-destructive & destructive testing
  • Improve worker safety
  • Calibrate in the field
  • Variable speed motor available
  • Wide range of accessories

Testing Capabilities

  • Removal Torque: With a single keystroke, the cap can be removed and reapplied to a designated torque level. The measured values can be stored in the analyzer’s memory.
  • Incremental Torque: The proper installation of a cap with an internal seal can be verified with this test.
  • Bridge Torque: This test determines the rotational force required to break the bands that bridge the gap between the cap and the tamper evident band on either an aluminum roll-on cap or a plastic cap.
  • Reverse Ratchet Torque: This measures the torque required to rotate a child-resistant cap in its free running state.
  • ROPP (Roll on Pilfer Proof): This test is designed to measure the torque required to open, break the bridges and then strip the threads on a Roll on Pilfer Proof cap.
  • Close: This selection enables the system to be used as a capping device. When used in this mode the actual closing value can be saved and outputted.
  • Strip: The strip test is designed to measure the torque required to drive the cap in a clockwise direction (close) in order to break the tamper evident band and remove the cap completely from the product.

Specifications

  • Length: 18 in. (45cm)
  • Width: 13.8 in. (35 cm)
  • Height: 32 in. (82 cm) 32 in.
  • Weight: 160 lbs (Ship wt.)
  • Torque Range In-Lb (N-m): 5 – 200 in-lbs
  • Accuracy: +/- 0.125% FS on 5-20 in-lbs models, +/- 0.5% FS on 30-200 in-lbs models
  • Resolution: 1:1000
  • Speed Range: 1 RPM (1-8 RPM w/ multi-speed option)
  • Input/Outputs: RS-232 Cable, USB, Ethernet
  • Voltage: 100/240 VAC, 50/60 Hz
  • Amperage: 2.0A max
  • Operation Humidity: up to 90% (non-condensing)
  • Operation Temperature: 32-100°F (0 – 40°C)
  • CE Certification: Yes

 

Options

  • Child resistant testing
  • Multi-speed motor
  • Custom tooling
  • Customizable data communication
  • Data acquisition
  • Printer
  • Training and service