DTR340 / EMR-C-DELTA

• Large field of detection
• For special applications

ypical applications

The DTR340 is a diode array detector. In association with the EMR LED light emitter, it is able to detect the weld hole made in order to locate the linking weld between two strips.

General description

The Weld Hole Detector DTR340 consists of a lens, a linear diode array, and a processing unit.
The Emitter EMR consist of an array of high power red LED.

Features

The DTR Weld Hole Detector has been designed for heavy industry with :

• Adjustable mounting stand (2 axes). In case the sensor needs to be replaced, it can be easily dismounted from the stand, thus keeping the alignment.
• Protective hood.
• Control panel beneath a hinged cover at rear.

Installation

The DTR sensor detects the light emitted by an EMR through the weld hole. Sensor and emitter are fixed perpendicular to the line axis in order to take the lateral deviation of the strip into account.
The following conditions have to be held for a proper detection:

• The DTR field of view and the emission of the EMR emitter should completely cover the lateral position of the hole.
• The EMR emitter should cover the field of view of the DTR sensor.
• The minimum hole diameter depending on the line speed is define in the graph below.

The figure bellow shows the different possible position of the hole: