• Digital Display with LED-display for strain gauges for panel-mounting
• LED, 5-digit, 14 mm high, red
• Input-signals ±24mV or ±240mV
• Freely programmable via keys
• 2 or 4 freely programmable limit contacs
• Freely programmable analog output (0/4-20mA / 0...10 V)
• Digital output signal via serial RS-232 or RS-485 interface
• 3 logical inputs for remote operating
• Limit frequency up to 5 Hz for nearly static applications
• Accuracy 0,03% of the full scale
• Up to 4 strain gauges with 350 ohm parallel connectable
• Bridge supply 5 or 10 VDC
• Needed power supply 85...250 VAC, optional 11-36 VDC
• User friendly and easy to maintain because of big screw-type terminals, keys and LED-display
• Protection Class IP 65 front when built-in
• Optional available with complete robust housing made of aluminum

The high accuracy of the digital display E1930 makes it suit weighing as well as statical force measuring or to monitoring loads on machines. Measurement values and the status of the relay-outputs are presented on the digital 5-digit display. All strain gauges (max 4 sensors with 350 Ohm Parallel) with an output signal up to max ±4,8mV/V respectively ±48mV/V can be connected. The internal sensor supply can be 5 or 10 VDC. Usually the customer connects the display it to the force transducer and also adjusts it. The programming is done menu-guided via the keys. It is possible to assign functions like tara, print and so on to the 3 programmable keys. The serial interface allows to retrieve and to set values and parameters. The optional 2 or 4 relays allow to monitor overtraveling and underrunning of limit values. The optional freely programmable analog output offers a 0/4...20mA output signal for analog interpretation. Filters allow to zero interfering signals.