cla-30-vervomech-vietnam.png

CLA 30 VERVOMECH VIETNAM

Hãng sản xuất: VERSITRON

Liên hệ tư vấn

Mr. Trí

tri@pitesco.com

0912 300 549

CLA 30 VERVOMECH VIETNAM, CLA 30 VERVOMECH, CLA 30 VIETNAM, CLA 30

 
Max load [N]  8.000
Max linear speed [mm/sec]  46
Standard strokes lenghts [mm] 100, 200, 300, 400, 500
 
Main features :
Rod diameter [mm] 35
Protective tube diameter [mm] 55
Motor flange European standard IEC 63 B14
Max static load - pull [N] 10.000
Max static load - push [N] 12.000
Actuator weight stroke 100 mm without motor [kg] 5
Additional weight each 100 mm 0,8
Duty cycle 30% over 10 min at 25?C room temperature.
3 worm gear ratios available.
7 different linear speeds availanle.
Acme screw 1 or 2 starts.
Lifelong grease lubricant for environmental temperature from -15 ?C to +40 ?C.
On request:
special execution for lower or higher environmental temperatures;
customized stroke lengths lower or higher than standard strokes;
push rod or protective tube in stainless steel;
special executions for applications in food or chemical industries;
motor mounting position on the opposite side (left hand);
rear fixing turned 90?.
Input versions : 
Standard motor flange IEC 63 B14;
motor flange and extended input shaft;
single input shaft;
double input shaft.
 
Electric motors :
AC 3-phases 230 / 400 V 50 Hz IP 55 F, 2 or 4 poles, with ventilation system;
AC motor 1-phase 230 V 50 Hz IP 55 F, 2 or 4 poles with ventilation system;
DC motor 12 V or 24 V IP 54 F, without fan.
AC and DC motors available with or without brake.
AC motors in multivoltage executions, can operate also at 60 Hz.
On request: special voltages, special wiring protections and insulations.
Acme screw actuators are statically self-locking. Brake motor is recommended for stopping accuracy.
Accessories :
2 adjustable end stroke switches cam-operated.
3 adjustable switches cam-operated (2 end stroke switches, 1 for intermediate position).
Front attachments: clevis end, ball joint, rod end.
Overload safety clutch.
Rear fixing bracket.
Rotative potentiometer single turn, 5 kOhm, for positioning control.