automation-tools.png

Automation Tools

PROCENTEC Automation Tools are specific solutions for automation professionals in training, installation, commissioning or maintenance.
Fault Generator

1.  Fault Generator

Fault Generator
Fault Generator

The PROCENTEC Fault Generator is a tool that mimics a fault on the physical electrical bus layer of your PROFIBUS DP network. It is designed for use by support / training, sales and technical engineers, as it enables you to quickly re-create an error for demonstration or for verification of operations during commissioning.

How to use the PROFIBUS Fault Generator:

1.    See below which faults can be simulated in your PROFIBUS DP network.

2.    Insert screw driver and set the rotary switch to create a change on the physical bus layer.

3.    Plug the PROCENTEC Fault Generator into any DB9 connector.

The PROCENTEC Fault Generator is the must-have tool for testing alarms or diagnostics, designed to fit your pocket.

Your benefits

  • It's a small tool and therefore easy to carry
  • Easy to use by the switch

These products are also interesting for you

Technical specifications
General specifications

·         Dimensions (L x W x H): 50mm x 30mm x 15mm

Weight: 15 grams
2. PROFIBUS DP Training Device

PROFIBUS DP Training Device
The SIO4DP is the first dedicated PROFIBUS training device for educational and testing environments. It allows engineers to practice their skills so they can act appropriately when faults occur. This results in the continuity of the production process, higher uptime and lower operating costs.
PROCENTEC SIO4DP

The continuity of the production process is essential in the world of process automation and factory automation. Downtime is unacceptable and causes unnecessarily high costs. Therefore, it is crucial to train engineers in a test environment where several potential issues in everyday practice can be addressed.

The SIO4DP is a DP-V1 PROFIBUS slave with 4 bits input and 4 bits output. It has a unique feature for educational purposes that no other slave can offer. It emulates bus failures and I/O patterns. It can generate a bus fault by physically removing itself from the PROFIBUS after a certain time. This time can be defined in the slave by editing the device parameters in the GSD. It also fits perfectly with tools like ProfiTrace to practice bus and data problems.

The SIO4DP is suitable for certified PROFIBUS Engineer training, PROFIBUS troubleshooting training, training kits and demo networks. It's also designed as a fully functional industrial I/O module which can be used in many factory automation applications.

Technical specifications

·         Print

Product features

·         DP-V0, DP-V1 (certification number: Z01831)

·         Ident Number: 6960

·         9.6 kbps .. 12 Mbps (auto detect)

·         Max. 244 Bytes input and 244 bytes output

·         Software and hardware addressing (0 - 126)

·         DB9 connector

·         Fail safe: Outputs OFF, Outputs ON, Keep last value, Custom failsafe value

·         Simulation input patterns: ON, OFF, Blink, Up counter, Down counter, Zig Zag, Random

·         Diagnostic LEDs

·         Power supply: 12 .. 30 VDC

·         IP 20 classification

·         Operating temperature: 0..60 °C

3.PROFIBUS DP Training Kit
PROFIBUS DP Training Kit
The portable PROCENTEC PROFIBUS DP Training Kit contains a complete automation network that can be used by training centers, automation universities or private companies for educational purposes. The kit meets all PI International standards for providing Certified PROFIBUS DP training.
A well-educated and experienced workforce is the bedrock to any reliable operation. Trained employees commit fewer mistakes and provide better products and service. With the PROCENTEC PROFIBUS DP Training Kit, you can provide new or continuing education that meets the internationally recognized standards of PI International for PROFIBUS DP.

The PROCENTEC PROFIBUS DP Training Kit is completely encased in a Peli case and provides users with both PROCENTEC solutions such as ComBricks and third party solutions as a complete network. It includes all power cables and licenses. With the kit you can program, troubleshoot and teach technicians more about the operations of automation networks.

The kit is the perfect solution for universities to train new students about networks in the class room or for extra studies. It can also be used by PI International Training Centers to provide certified training courses. The kit is an added value for any end user’s continuing education program, allowing for a manager to have comfort knowing the company is increasing the skills and knowledge of its human assets.

Service & Support

FAQ's

Check the most frequently asked questions about ComBricks.

On-site & Online Support

Worldwide PROFIBUS and PROFINET support; on-site and online.

Network Certification

Find out what PROCENTEC can certify in your network.

GSD files

Find and download all the GSD files you need.

Software & Firmware downloads

Request firmware, software and download GSD-files.

Training

·         Certified PROFIBUS Engineer

16 September 2019, 28 October 2019

'Distinguish yourself from the others and show that you are the expert.....Become a Certified PROFIBUS Engineer.'

·         PROFIBUS Troubleshooting & Maintenance

16 September 2019, 17 September 2019, 28 October 2019

The PROFIBUS Troubleshooting and Maintenance training course is fully concentrated on those who install and maintain PROFIBUS installations.

·         ProfiTrace Training

This training is concentrated on the number 1 troubleshooting tool for PROFIBUS networks.

4.PROFIBUS PA Training Kit
PROFIBUS PA Training Kit
The portable PROCENTEC PROFIBUS PA Training Kit contains a complete automation network that can be used by training centers, automation universities or private companies for educational purposes. The kit meets all PI International standards for providing Certified PROFIBUS DP training.
A well-educated an experienced workforce is the bedrock to any reliable operation. Trained employees commit fewer mistakes and provide better products and service. With the PROCENTEC PROFIBUS PA Training Kit, you can provide new or continuing education that meets the internationally recognized standards of PI International for PROFIBUS DP.

The PROCENTEC PROFIBUS PA Training Kit is completely encased in a Peli case and provides users with both PROCENTEC solutions such as ComBricks and third party solutions as a complete network. It includes all power cables and licenses. With the kit you can program, troubleshoot and teach technicians more about the operations of automation networks.

The kit is the perfect solution for universities to train new students about networks in the class room or for extra studies. It can also be used by PI International Training Centers to provide certified training courses. The kit is an added value for any end user’s continuing education program, allowing for a manager to have comfort knowing the company is increasing the skills and knowledge of its human assets.

Service & Support

FAQ's

Check the most frequently asked questions about ComBricks.

On-site & Online Support

Worldwide PROFIBUS and PROFINET support; on-site and online.

Network Certification

Find out what PROCENTEC can certify in your network.

GSD files

Find and download all the GSD files you need.

Software & Firmware downloads

Request firmware, software and download GSD-files.

Training

·         Certified PROFIBUS Engineer

16 September 2019, 28 October 2019

'Distinguish yourself from the others and show that you are the expert.....Become a Certified PROFIBUS Engineer.'

·         PROFIBUS Troubleshooting & Maintenance

16 September 2019, 17 September 2019, 28 October 2019

The PROFIBUS Troubleshooting and Maintenance training course is fully concentrated on those who install and maintain PROFIBUS installations.

·         ProfiTrace Training

This training is concentrated on the number 1 troubleshooting tool for PROFIBUS networks.

5.PROFINET Training Kit
PROFINET Training Kit
The portable PROCENTEC PROFINET Training Kit contains a complete automation network that can be used by training centers, automation universities or private companies for educational purposes. The kit meets all PI International standards for providing Certified PROFINET training.
A well-educated an experienced workforce is the bedrock to any reliable operation. Trained employees commit fewer mistakes and provide better products and service. With the PROCENTEC PROFINET Training Kit, you can provide new or continuing education that meets the internationally recognized standards of PI International for PROFIBUS DP.

The PROCENTEC PROFINET Training Kit is completely encased in a Peli case and provides users with both PROCENTEC solutions such as ComBricks and third party solutions as a complete network. It includes all power cables and licenses. With the kit you can program, troubleshoot and teach technicians more about the operations of automation networks.

The kit is the perfect solution for universities to train new students about networks in the class room or for extra studies. It can also be used by PI International Training Centers to provide certified training courses. The kit is an added value for any end user’s continuing education program, allowing for a manager to have comfort knowing the company is increasing the skills and knowledge of its human assets.

Service & Support

FAQ's

Check the most frequently asked questions about ComBricks.

On-site & Online Support

Worldwide PROFIBUS and PROFINET support; on-site and online.

Network Certification

Find out what PROCENTEC can certify in your network.

GSD files

Find and download all the GSD files you need.

Software & Firmware downloads

Request firmware, software and download GSD-files.

Training

·         Certified PROFIBUS Engineer

16 September 2019, 28 October 2019

'Distinguish yourself from the others and show that you are the expert.....Become a Certified PROFIBUS Engineer.'

·         PROFIBUS Troubleshooting & Maintenance

16 September 2019, 17 September 2019, 28 October 2019

The PROFIBUS Troubleshooting and Maintenance training course is fully concentrated on those who install and maintain PROFIBUS installations.

·         ProfiTrace Training

This training is concentrated on the number 1 troubleshooting tool for PROFIBUS networks.