atl-50-servomech-vietnam.png

ATL 50 SERVOMECH VIETNAMATL 50 SERVOMECHATL 50 VIETNAMATL 50

Max load [N]  25.000
Max linear speed [mm/sec]  93
Standard strokes lenghts [mm] 100, 200, 300, 400, 500, 600, 700, 800

 
Main features :
Rod diameter [mm] 50
Protective tube diameter [mm] 70
Motor flange European standard IEC 63 B5 o 71 B5
Max static load - pull [N] 25.000
Max static load - push [N] 25.000
Actuator weight stroke 100 mm without motor [kg] 30
Additional weight each 100 mm 2
Duty cycle 30% over 10 min at 25?C room temperature.
3 worm gear ratios available.
8 different linear speeds available.
Acme screw 1 or 2 starts.
Lifelong grease lubricant for environmental temperature from -15 ?C to +40 ?C.
On request:
special execution for lower or higher environmental temperatures;
customized stroke lengths lower or higher than standard strokes;
push rod in stainless steel;
motor mounting position on the opposite side (left hand);
rear fixing turned 90?.

Input versions : 
Standard motor flange IEC 63 B5 or IEC 71 B5;
motor flange and extended input shaft;
single input shaft;
double input shaft;
motor adapter + coupling IEC 80 B5, IEC 90 B5, IEC 80 B14 or IEC 90 B14.

 
Electric motors :
AC 3-phases 230 / 400 V 50 Hz IP 55 F, 2 or 4 poles, with ventilation system;
AC motor 1-phase 230 V 50 Hz IP 55 F, 2 or 4 poles with ventilation system;
AC motors available with or without brake.
AC motors in multivoltage executions, can operate also at 60 Hz.
On request: special voltages, special wiring protections and insulations.
Acme screw actuators are statically self-locking. Brake motor is recommended for stopping accuracy.

Accessories :
Electrical stroke end switches.
Proximity stroke ned switches.
Front attachments: hinged head, ball joint, flange end.
Rear fixing bracket.
Antiturn device.
Encoder EH53 incremental bidiretional, 100 or 500 pulses per 1 motor turn