odac®-18xy-zumbach-vietnam-giam-sat-duong-kinh-va-vi-tri-chinh-xac-cho-cac-quy-trinh-ve-soi-quang-odac®-18xy-zumbach-vietnam.png

ODAC® 18XY Zumbach Vietnam, Giám sát đường kính và vị trí chính xác cho các quy trình Vẽ sợi quang ODAC® 18XY Zumbach Vietnam, phân phối chính hãng Zumbach Vietnam

 

ZUMBACH's advanced laser gauge ODAC® 18XY combined with the analog interface AI 4-ODAC®, represents an ideal solution to these problems.

  • Scan rate and accuracy are extremely high.
  • The position measurement in X and Y is precise and linear.
  • The vibration frequency can be determined thanks to the high X-Y scan rate and processing speed.
  • The analog outputs for diameter and position have a high resolution (16 bit) and a high update rate (120/s). (To date, most available equipment has resolutions of 12 bit and update rates between 10 and 60/s).

Measurement After Coating

The same package (ODAC® 18XY with AI 4-ODAC®) can be used after the coating stations where position monitoring is normally not required.

Ultra fast diameter gauges with integrated fault detection

These new series offer high-precision, non-contact laser diameter measurement with extremely high scan rates and an integrated fault detection function.

Thanks to the ultra high scan rates and single scan function, these scanners are, in addition to the standard diameter measurement, especially suited for efficient fault detection (lumps/neckdowns) for cables with bigger diameters at a medium line speeds. Therefore, a separate and conventional fault detector becomes needless for such applications.

Outstanding advantages

  • Double or even higher scan rates than before, i.e. more measurements per time unit
  • Maximum fault detection (lumps/neckdowns) at increased line speeds
  • FFT / SRL analysis with higher bandwidths