ASKER Vietnam, Micro durometer MD-1 capa, Đại lý chính hãng ASKER Vietnam

High-precision measurement of micro-sized specimens with a simple operation.

A hardness tester for thin and small specimens of various rubbers, thermoplastic elastomers, nonrigid plastics. Unlike conventional durometers, it enables direct measurement of the hardness of objects with higher reproducibility

Measurement time

About a minimum of 3 seconds for one automatic measurement cycle.

Measurement objects

Capable of measuring the hardness of small rubber parts including those for automobiles, electronic circuits, office machines in the product shape instead of conventionally used test pieces. Selection of three modes, [PEAK HOLD], [TIMER HOLD], or [NORMAL] as standard.

The timer may be set by the second to a maximum of 15 seconds.

Accessories

Connectable to PC via Ethernet or RS-232C interface.

Equipped with application software for measurement

Type

Type A for general rubbers and Type C for soft rubbers

peration buttons

Operation buttons

  • MEASURE···To start testing actions
  • PRINT···To print out measurement results
  • RESET···To set the sensor and indicator return to original status
  • AUTO···To automatically print/reset switching
  • MODE···To select measurement mode from "Peak hold", "Timer-hold", and "Normal."

Application software for measurement　

Measurement of peak value and timer-hold value

Measurement of the decrement of hardness values (every 100msec)

Data may be easily exported to Excel.

Data saved in csv format.

*Some technical information including th